Disposable Medical Protective Clothing Direct From Factory
Full-body barrier protection built to the same certified standard as our surgical masks — CE (EU MDR) and FDA 510(k) registered, produced in a Class 100,000 cleanroom.
Consistent seam integrity, controlled nonwoven basis weight, and complete export documentation on every shipment — so your buyers clear customs and your compliance team stays quiet.
What This Product Is — and Where It Sits in the Protective Clothing Range
Disposable medical protective clothing is a full-coverage barrier garment — hood, body, sleeves, and legs in a single sealed unit — designed to protect the wearer from liquid splash, particulate contamination, and biological hazards in clinical and controlled environments. It is the highest-protection tier in the disposable garment category, sitting above isolation gowns (which cover the torso only) and above standard coveralls (which typically lack the sealed seam construction required for medical use).
The distinction matters commercially. Buyers sourcing for hospital procurement, emergency response stockpiles, or government tender fulfillment need to specify the right protection level — and the documentation to prove it. An isolation gown won't satisfy a Type 5/6 protective clothing specification. A standard industrial coverall won't pass a hospital procurement audit. This product is the one that does.
Our disposable medical protective clothing is produced in the same Class 100,000 (ISO 8) cleanroom facility where we manufacture our certified surgical masks and N95 respirators. The same incoming material inspection, the same in-process QC checkpoints, the same outgoing BFE/PFE and barrier performance testing protocols. If you've sourced masks from us and they've cleared your compliance review, the protective clothing comes out of the same quality system.
Protection Tier Comparison
Torso coverage only. Limited barrier.
Full body, but lacks sealed seam construction for medical use.
Full-body sealed unit. Hood, sealed seams, medical-grade barrier. Passes hospital procurement audit.
Same Quality System as Our Mask Range
Produced in our Class 100,000 (ISO 8) cleanroom with the same incoming material inspection, in-process QC checkpoints, and outgoing barrier performance testing protocols used for our certified surgical masks and N95 respirators. One quality system, consistent output across product lines.
Technical Specifications
The table below reflects industry-standard values for this product type. Actual specifications may vary by configuration — contact us for a detailed product data sheet for your specific order.
| Parameter | Specification |
|---|---|
| Material | SMS (Spunbond-Meltblown-Spunbond) nonwoven fabric |
| Fabric Basis Weight | Typically 40–60 gsm (standard medical grade) |
| Construction | Hooded coverall, full-body coverage |
| Seam Type | Ultrasonic-welded or heat-sealed seams |
| Closure | Front zipper with adhesive flap cover |
| Elastic | Wrists, ankles, and face opening |
| Sizes Available | S / M / L / XL / XXL / XXXL (custom sizing available) |
| Color | White (standard); other colors available on request |
| Barrier Performance | Meets EN 14126 (infectious agent resistance) |
| Liquid Resistance | Meets EN 13034 Type 6 / EN 14605 Type 4 (typical) |
| Sterility | Non-sterile standard; sterile (EO-sterilized) available on request |
| Packaging | Individually folded, polybag sealed; carton qty per customer spec |
| Shelf Life | 3 years from production date (standard) |
Configuration Note
If your tender requires Type 4 liquid-tight seam performance or sterile packaging, confirm this at the inquiry stage — these configurations affect material selection and line setup, and we'll spec the right version before you commit to an order.
Key Highlights
Need a detailed product data sheet for your specific configuration?
We'll spec the right version for your tender requirements.
Seam Integrity: The Specification That Separates Medical-Grade from Industrial
Most buyers comparing protective clothing quotes focus on fabric weight and price per unit. The variable that actually determines whether the garment holds up in a clinical environment is seam construction — and it's the one most suppliers describe vaguely.
Ultrasonic Welding — Our Standard
We use ultrasonic welding on the primary seams. The process bonds the nonwoven layers by vibration-generated heat, creating a fused joint with no needle holes, no adhesive, and no thread. The result is a seam that maintains the fabric's barrier properties across the joint — liquid and particulate can't migrate through stitch holes because there are no stitch holes.
For garments intended for use around infectious agents or biological fluids, this is the construction method that satisfies EN 14126 and equivalent standards.
Sewn Seams with Seam Tape — Available, Not Default
The alternative — sewn seams with seam tape — is common in lower-cost protective clothing and adequate for some applications. We can produce that configuration too. But when buyers are sourcing for hospital use, emergency response, or any environment where the garment is the last line of defense against contamination, the ultrasonic-welded construction is what we recommend and what we run as standard.
We've had buyers come back after a competitor's sewn-seam product failed a hospital procurement audit. The seam tape had delaminated in storage. That's a recoverable situation for the buyer — but it costs time and credibility with their end customer.
Seam Method Comparison
Zipper Closure System
The front zipper runs the full length of the torso, and the adhesive flap cover seals over it after donning. This eliminates the gap that standard zipper closures leave at the pull tab — a detail that shows up in EN 14126 test protocols and that hospital infection control teams check during product qualification.
Fabric Construction: SMS Nonwoven and Why Basis Weight Matters for Your Market
The outer and inner layers of our protective clothing use spunbond nonwoven fabric; the middle layer is meltblown. This SMS (Spunbond-Meltblown-Spunbond) construction is the industry standard for medical-grade disposable garments because it combines the mechanical strength of spunbond with the filtration and barrier properties of meltblown.
In-House Meltblown Production
We produce our own meltblown nonwoven fabric in-house — the same capability that underpins our mask filtration performance. This matters for protective clothing because the meltblown layer is what gives the SMS laminate its liquid and particulate barrier properties.
When we specify a 50 gsm SMS fabric for a garment, we know the meltblown component's fiber diameter, basis weight, and electrostatic charge because we set those parameters ourselves. A factory buying SMS fabric from an outside supplier is trusting the supplier's batch consistency. We're not.
Basis Weight Selection — A Commercial Decision
Basis weight selection is a real commercial decision, not just a spec number. We'll help you choose the right spec for your target market and downstream customer profile.
Vertical Integration Advantage
- Fiber diameter controlled at source
- Meltblown basis weight set per order
- Electrostatic charge verified in-line
- No third-party batch variance risk
40 gsm SMS
Lighter Weight- Lighter, more breathable
- Lower cost per unit
- Lower-risk clinical environments
- General healthcare worker use
- Markets where price sensitivity is high
60 gsm SMS
Higher Performance- Higher barrier performance
- Better durability for extended wear
- Higher-risk procedures
- Emergency response stockpiles
- Hospital procurement with strict performance requirements
Market Segments Where This Product Moves
Understanding where this product fits in your distribution strategy helps you position it correctly and price it for the right buyer expectations.
Hospital & Clinical Procurement
Highest Volume SegmentHospital systems — whether direct procurement or through a GPO (Group Purchasing Organization) — buy protective clothing in large quantities on annual or multi-year contracts. The key requirements are consistent barrier performance across batches, CE or FDA documentation for compliance review, and packaging that supports clinical inventory management.
If you're supplying hospital distributors or GPO-approved distributors, this is a high-volume, repeatable segment with predictable demand cycles.
Government & Emergency Response Stockpiling
Significant Since 2020National health agencies, civil defense organizations, and regional emergency management bodies maintain strategic reserves of PPE including protective clothing. These tenders typically require specific performance certifications (EN 14126, EN 13034, or equivalent), sterile or non-sterile options depending on intended use, and documentation packages that satisfy government procurement audit requirements.
Our CE (EU MDR) and FDA 510(k) registration, combined with our in-house test reporting capability, positions us well for this segment.
Industrial & Pharmaceutical Manufacturing
Cleanroom & Controlled EnvironmentsDisposable protective clothing is used in cleanroom and controlled-environment applications — pharmaceutical production, semiconductor manufacturing, food processing. The performance requirements overlap significantly with medical-grade specifications, and buyers in these sectors often prefer to source from a certified medical device manufacturer because the quality system documentation is more rigorous than what industrial PPE suppliers typically provide.
If you're distributing into these sectors, our ISO 13485 quality system documentation is a differentiator your downstream customers will recognize.
Export Distribution & Private-Label Programs
Most Common Buyer ProfileThis represents the segment most of our direct buyers operate in. You're building a PPE product line, stocking a distribution catalog, or developing a private-label brand for a specific regional market. The commercial logic here is margin and differentiation: a CE + FDA registered protective clothing product with documented barrier performance commands a higher price point than unregistered alternatives, and the certification documentation reduces your compliance risk when selling into regulated markets.
We handle OEM packaging — your brand, your label design, your retail or clinical packaging format — without adding a separate packaging supplier to your supply chain.
Compliance Documentation for Your Target Market
The certifications on this product are the ones that determine whether your shipment clears customs and whether your downstream buyer can use the product in a regulated environment.
CE (EU MDR)
Our protective clothing is CE-marked under the EU Medical Device Regulation, covering the European market. The technical file includes performance test reports, risk management documentation, and the declaration of conformity your EU importer of record needs. Since MDR replaced MDD in 2021, the documentation requirements have become significantly more detailed — we've been through this with multiple European buyers and the technical file is current.
FDA 510(k) Registered
US market clearance for medical devices. This is the registration that allows your US customs broker to classify the product correctly and that your US healthcare distributor customers need to see before adding the product to their catalog.
ISO 13485:2016
The quality management system standard for medical device manufacturers. This is the system-level certification that tells your procurement compliance team the factory operates under documented design controls, risk management, and traceability requirements — not just general quality management.
SGS Verified
Third-party audit and testing verification, available as supporting documentation for buyers whose customers require independent lab confirmation.
Documentation Package Included With Every Shipment
For buyers entering new markets: the documentation package we provide with each shipment includes everything your customs broker or compliance team needs to clear and distribute the product.
Markets We've Documented For
If your market has a specific requirement, tell us at the inquiry stage and we'll confirm what we can provide.
OEM Packaging and Private-Label Configuration
Standard OEM Work
Standard OEM work — your brand on our existing product — is straightforward. You provide artwork files and packaging specifications; we produce a pre-production sample for your approval before full production runs. We handle inner polybag printing, outer carton labeling, and any language or regulatory text requirements for your target market.
Private-Label Programs for Regional Markets
For private-label programs targeting specific regional markets, we can configure the packaging to meet local labeling requirements — EU MDR labeling fields, FDA UDI requirements, or Gulf Cooperation Council market-specific formats. This is work we do regularly for our existing buyers, and it doesn't require a separate packaging supplier or a third-party print run.
Custom Configurations
Custom configurations — modified hood design, different elastic specifications, added thumb loops, or alternative closure systems — go through our product development process. We'll produce a sample run for your approval, confirm the performance specs on the modified design, and then set up the production line for your order. MOQ for custom configurations is higher than standard SKUs; we'll give you the specific number when we understand your requirements.
Lead Time Planning
- Standard SKU orders with standard OEM packaging: 20–30 days from order confirmation.
- Custom configurations add 10–15 days for sample development and approval.
- If you're working toward a tender deadline, tell us the date and we'll work backward from it.
We Handle
- Inner polybag printing
- Outer carton labeling
- Language & regulatory text
- EU MDR / FDA UDI / GCC formats
Custom Modifications Available
- Modified hood design
- Different elastic specifications
- Added thumb loops
- Alternative closure systems
Container Loading and Landed Cost Planning
Protective clothing ships more efficiently than masks on a per-unit basis because the garments are individually folded and polybag-sealed, then packed into cartons. Standard carton configuration for our protective clothing is 50 pieces per carton (individual polybag), with carton dimensions optimized for 20GP and 40HQ container loading.
Depending on garment size and carton configuration
Depending on garment size and carton configuration
Why These Numbers Matter
These numbers matter for your landed cost calculation. If you're quoting a tender or building a distribution price list, the container loading efficiency directly affects your per-unit freight cost.
We can provide exact carton dimensions and container loading calculations for your specific order configuration — useful if you're working with a freight forwarder on a cost model before committing to an order volume.
Amazon FBA & E-Commerce Distribution
For buyers building Amazon FBA or e-commerce distribution programs: we can configure individual retail packaging with barcodes, FNSKU labels, and suffocation warning text per Amazon's requirements.
Blind drop-shipping and white-label configurations are available for established buyers.
Standard Packing Specification
-
Individual polybag per garment
-
50 pieces per carton
-
Carton dimensions optimized for 20GP & 40HQ
-
FNSKU / barcode / retail packaging available
Sourcing This Product Alongside Our Mask Range
Most buyers who source protective clothing from us are already sourcing masks — surgical masks, N95 respirators, or disposable 3-ply masks — from the same order.
Single Compliance Package
The compliance documentation for a full PPE program (masks + protective clothing) comes from a single quality system, a single set of test reports, and a single export documentation package. Your compliance team reviews one supplier's paperwork instead of two.
Single Container Shipment
If you're building a complete PPE product line — masks, protective clothing, and accessories — we can configure the order to ship in a single container with a consolidated documentation package. This is how most of our hospital supply distributors and government tender buyers structure their orders.
Protective Clothing Range — Sibling Products
For protective clothing specifically, the sibling products in our range cover different protection levels and use cases:
Medical Isolation Gown
Torso-only coverage, lower protection level, appropriate for standard clinical environments and lower-risk procedures.
- Lower per-unit cost
- Higher volume potential in general healthcare distribution
Medical Protective Coverall
Full-body coverage with higher-specification barrier performance for hazardous material handling and high-risk clinical environments.
- Maximum barrier performance
- Hazmat and high-risk clinical specification
If you're not sure which configuration fits your target market, send us the end-use specification or the tender requirement — we'll tell you which product matches and what the documentation looks like.
Frequently Asked Questions
Technical and commercial answers for distributors, procurement teams, and tender buyers.
What certifications does your disposable medical protective clothing hold?
What certifications does your disposable medical protective clothing hold?
Our protective clothing carries CE marking under EU MDR, FDA 510(k) registration, and is produced under an ISO 13485:2016 quality management system. SGS third-party audit documentation is available on request.
Performance testing covers:
- EN 14126 — resistance to infectious agents
- EN 13034 Type 6 / EN 14605 Type 4 — liquid resistance
- Seam strength per relevant EN standards
Test reports are included in the standard documentation package with every shipment.
What is the difference between disposable medical protective clothing and a medical isolation gown?
What is the difference between disposable medical protective clothing and a medical isolation gown?
Protective clothing (coverall) provides full-body coverage — hood, body, sleeves, and legs in a single sealed unit — and is designed for higher-risk environments where full-body barrier protection is required.
An isolation gown covers the torso and arms only, with an open back, and is appropriate for standard clinical environments and lower-risk procedures. The protection level, certification requirements, and price point differ significantly.
Selection guidance: If you're sourcing for hospital ICU use, emergency response, or infectious disease environments, protective clothing is the correct specification. For general ward use or outpatient settings, an isolation gown is typically sufficient and more cost-effective.
What is the minimum order quantity for disposable medical protective clothing?
What is the minimum order quantity for disposable medical protective clothing?
Standard SKUs start at 50,000 pieces.
Custom configurations — modified design, non-standard sizing, sterile packaging — typically require a higher minimum to justify line setup and material procurement. We'll confirm the specific MOQ for your configuration at the inquiry stage.
Can you produce sterile (EO-sterilized) protective clothing?
Can you produce sterile (EO-sterilized) protective clothing?
Yes. Sterile configuration requires EO (ethylene oxide) sterilization, which we arrange through a certified third-party sterilization facility. This adds lead time and cost compared to non-sterile product.
If your end buyer requires sterile packaging — typically hospital surgical environments or specific government tender specifications — confirm this at the inquiry stage so we can include it in the production plan and quote.
What SMS fabric basis weight should I specify for my market?
What SMS fabric basis weight should I specify for my market?
For general healthcare distribution and standard clinical use, 40–50 gsm SMS is the typical specification — it balances barrier performance, breathability, and cost.
For hospital ICU, infectious disease, or emergency response applications where the garment is used in higher-risk environments, 55–60 gsm SMS provides better barrier performance and durability.
Tender tip: If you're responding to a specific tender, the tender specification will typically state the required basis weight or the performance standard it must meet — send us the spec and we'll confirm the right fabric configuration.
How long does production take for a standard order?
How long does production take for a standard order?
Standard SKU orders with standard OEM packaging
20–30 days from order confirmation.
Custom configurations (modified design, sterile packaging, non-standard sizing)
Add 10–15 days for sample development and approval.
We give you a specific delivery date at order confirmation, not a range.
Get a Quote for Disposable Medical Protective Clothing
Tell us your target market, required certifications, and approximate order volume — we'll come back with a specific product configuration, documentation summary, and FOB price within 24 hours.
If you're responding to a tender or have a specific performance specification, send us the document. We'll review it and tell you exactly which configuration meets the requirement and what the lead time looks like.